Modified gearset for Toyota 4WD range

Modified gearset for Toyota 4WD range

Parts

Terrain Tamer have recently released a second Modified 5th Gear Set, suitable for Hilux, Prado and an expanded range of 70 series Land Cruiser models.

The original Modified Fifth Gear set was released in 2017 and designed to fit 70 Series V8 Toyota Land Cruiser vehicles. A commonly raised issue for these models is that the engines run at unnecessarily high RPMs when travelling at highway or cruising speeds. A speed of 100km/hr in fifth gear can equate to approximately 2400 RPM, causing loud engine noise, excessive fluid temperatures and poor fuel consumption, with a detrimental long-term effect on engine durability.

A second gear set has now been developed for a further range of vehicles, that have since been increasingly reported to experience the same problems.

Terrain Tamer have developed their Modified Gear Sets to feature a taller 5th gear, as a direct replacement for the OE fitted part, bringing the original gear ratio of .881 down to .736, reducing RPM by up to 20 percent, and effectively resulting in improved engine stability, addressing any fuel efficiency or running temperature issues that may arise from the original gear and generally offering a smoother and quieter drive.

Developed at Terrain Tamer’s head office in Melbourne, this taller gear has been made from 62 strength Rockwell hardened steel by an OE manufacturer in Japan, to meet exclusive Terrain Tamer tooling specifications.

Terrain Tamer Modified 5th Gear Sets can be purchased individually or in gearbox overhaul kits. For more information on this or on Terrain Tamer’s full range of parts, visit terraintamer.com or call 1300 888 444.

Publishing Information
Page Number:
1
Related Articles
VDO back to the automotive aftermarket
With the successful spin-off of AUMOVIO, the long-established VDO brand is celebrating its return to the independent aftermarket. The entire portfolio in the field of electronics and mechatronics,...
Synthetic oil primer
The benefits of using lubricants made with synthetic base oil are numerous. Synthetic base oils have better low and high temperature viscosity performance, especially at higher to extreme operating...
UFI Filters lands in New Zealand for the European filtration market
Founded in 1971, UFI Filters is a global leader in filtration technology and thermal management. It serves a wide range of sectors – from automotive, aerospace and marine to specialized industrial...